Before starting the Candy Gummy Counting Machine, a series of systematic equipment inspections and preparations must be carried out to ensure the stability and reliability of the equipment during operation. First, carefully check whether the power supply and air source connection of the equipment is stable to prevent failures caused by insufficient power supply or insufficient air supply. In addition, the status of the indicator lights on the operating panel also needs to be carefully confirmed to ensure the sensitivity and effectiveness of the manual start and emergency stop buttons. These preventive measures significantly reduce the risk of accidents during operation of the equipment and lay a solid foundation for subsequent operations.
After confirming that the equipment is in good condition, parameter adjustment becomes a key link in the operation process. Depending on the variety of candy and production requirements, it is crucial to set up the screen with a PLC (Programmable Logic Controller). As the core control unit of Candy Gummy Counting Machine, the PLC is responsible for comprehensively monitoring and regulating the various functional modules of the equipment. Operators can flexibly set counting speed and counting range through PLC control screens to meet the diverse candy production needs. In addition, other parameters of the equipment, such as vibration frequency and conveyor belt speed, can also be fine-tuned to ensure stability and accuracy during the process of several particles and optimize production efficiency.
After completing the parameter setting, material preparation is required. Put the prepared candies evenly into the hopper of the pellet counting machine, pay attention to the arrangement and quantity of the candies to reduce the errors that may occur during the pellet counting process. The design of the hopper fully takes into account the flowability and stability of the candy, ensuring that the candy can enter the several particles smoothly and avoids the impact of production due to clogging.
When everything is ready, press the start button and the Candy Gummy Counting Machine starts to work automatically. The sensors and control systems inside the equipment will monitor the flow and quantity of candies in real time to ensure the accurate quantity of candies in each package. At the same time, the PLC control screen will display the working status of the device in real time, including key information such as counting quantity and speed, so that operators can grasp the operation status of the device at any time and make corresponding adjustments.
During the operation of the candy pellet packaging machine, the operator must maintain a high degree of vigilance, pay close attention to the working status of the equipment, and promptly detect and deal with any abnormal situations. For example, if the equipment has problems such as lag, number of leaks or inaccurate counting, the operator should immediately press the emergency stop button to perform a shutdown check and troubleshoot the fault. In addition, after shutdown, the remaining candy inside the machine must be cleaned up in time to prevent adverse effects on the next work.
Copyright © 2023 Nantong Jianfeng Machinery Co., Ltd. All Rights Reserved.